Check the inverter for packaging damage as soon as you receive it.
Inform the carrier of any packaging damage immediately.
A requirement of fault-free operation and fulfilment of any rights to claim under guarantee is that
these instructions and remarks are followed. Therefore read these instructions carefully before you
start working with the unit.
These instructions also contain important service instructions. They should therefore be kept near
the inverter.
Always follow the relevant safety instructions and warnings. They are marked as follows:
Cross-references to other sections or publications are indicated by
→
.
Each unit is manufactured and tested to current SEW-EURODRIVE technical specifications.
The manufacturer reserves the right to make alterations to the technical data and design which
serve the cause of technical progress.
Storage instructions:
Permissible storage temperature:
-25°C...+70°C
Permissible humidity:
No restrictions during storage.
On commissioning the unit must be free of condensation.
Extended storage:
Connect the unit to the power supply for at least 5 minutes
every 2 years.
Failing that the service life of the unit may be reduced.
Disposal (please observe the applicable waste disposal regulations):
Depending on the material they are made of, unit components are to be disposed of in accordance
with the applicable waste disposal regulations for:
electronics scrap (pcbs), plastic material (housing), sheet metal, copper, etc.
Electrical hazard, e.g. when working on live equipment
Mechanical hazard, e.g. when working on hoists.
Important instructions for safe and fault-free operation.
1
General Notes
4
MOVITRAC
®
0500 - Operating Instructions
