SEW-Eurodrive MOVIGEAR MGFx-DSI Series, Operating Instructions Manual

Page: 131 / 408

6
Startup
Process data assignment – MOVIKIT® function module "5PD Velocity"
Operating Instructions – MOVIGEAR
®
performance
131
6.5 Process data assignment – MOVIKIT
®
function module "5PD Velocity"
Process data assignment – MOVIKIT® function module "5PD Velocity"
In the standard design, the device is delivered with the MOVIKIT
®
function module
"5PD Velocity".
In automatic mode, the device is controlled using the following process data configura-
tion:
PO Function PI Function
PO1 Control word PI1 Status word
PO2 Speed setpoint PI2 Actual speed
PO3 Acceleration PI3 Drive status/drive fault
PO4 Deceleration PI4 Actual torque
PO5 Digital outputs PI5 Digital inputs
For further information on the function and process data scaling of the MOVIKIT
®
func-
tion module "5PD Velocity", refer to the relevant documentation or the MOVISUITE
®
startup software.
25887548/EN – 04/2019