6
Electrical installation
Addendum to the Operating Instructions – Synchronous Servomotors CMP40 – 112, CMPZ71 – 100
20
6
Electrical installation
DANGER
Risk of injury due to electric shock.
Severe or fatal injuries.
•
It is essential to comply with the safety notes in chapter 2 during installation!
•
Switch contacts in utilization category AC-3 according to EN 60947-4-1 must be
used for switching the motor and the brake.
•
Use switch contacts in utilization category DC-3 according to EN 60947-4-1 for
switching the brake with DC 24 V.
•
When motors are powered by inverters, you must adhere to the wiring instruc-
tions issued by the inverter manufacturer.
•
Observe the operating instructions of the servo inverter.
INFORMATION
A bag containing the following information is attached to the motor:
Observe these notes.
•
Safety notes
•
Wiring diagram
Note the information and explanations about correct wiring in the corresponding oper-
ating instructions.
22491465/EN – 03/2016
