11
Declaration of Conformity
Addendum to the Operating Instructions – Synchronous Servomotors CMP40 – 112, CMPZ71 – 100
28
11
Declaration of Conformity
Declaration of Conformity
Translation of the original text
900820610/EN
SEW-EURODRIVE GmbH & Co. KG
Ernst-Blickle-Straße 42, D-76646 Bruchsal
declares under sole responsibility that the following products
Bruchsal
a)
Authorized representative for issuing this declaration on behalf of the manufacturer
b)
Authorized representative for compiling the technical documents
Place
Date
29.02.2016
Managing Director Technology
Johann Soder
a) b)
motors of the series
CMP40-112, CMPZ71-100
in connection with encoders of the type
AK0H (functional safety)
AK1H (functional safety)
possibly in connection with
Gear units of the series
R..; RES
F..
K..; KES
W..
S..
H..
BS.F..
PS.F..
PS.C..
are in conformity with
Machinery Directive
2006/42/EC
1)
(L 157, 09.06.2006, 24-86)
This includes the fulfillment of the protection targets for "electrical power supply" in accordance with annex I No. 1.5.1
according to the Low Voltage Directive 73/23/EEC -- Note: 2006/95/EC (until 19 Apr 2016) and 2014/35/EU (as of 20 Apr
2016) are currently valid.
Applied harmonized standards:
EN ISO 13849-1:2008 / AC:2009
5)
EN 61800-5-2: 2007
5)
EN 60034-1:2010
EN 60034-5:2001 / A1:2007
EN 60664-1:2007
EN ISO 12100:2010
EN 60204-1:2006 / A1:2009
Other applied standards:
EN 61508-2:2010
1) The products are intended for installation in machines. Startup is prohibited until it has been established that the machinery into
which these products are to be incorporated complies with the provisions of the aforementioned Machinery Directive.
5) All safety-relevant requirements of the product-specific documentation (operating instructions, manual, etc.) must be met over the
entire product life cycle.
22491465/EN – 03/2016
