SEVEN CHGCT30I-1E, User Manual

Page: 24 / 134

Intelligent Charging
This cart is equipped with an intelligent charging system that manages the power and is
customizable:
Charge Cart will look for devices plugged to power strip every 60 seconds. Charging
process starts at latest after this amount of time.
–
If total current need of the cart is more than the limit set at SW1 but the single
current need for each power strip is less than 5A (1150W at 230V), then one power
strip will be charged at a time for the limit set at SW2 each. This duration is customi-
zable – see “Custom settings” section. Corresponding LED indicator will fade on/off
slowly.
–
If total current need on the cart is less than the limit set at SW1 and single current
need for each power strip is less than 5A (1150W at 230V), all power strips will be
actively charging. Power LED indicator is ON and LEDs will fade on/off slowly.
–
• At power-up
If the power demand of a single shelf exeeds the maximum allowed power (1150W –
5A at 230V) then the cycle mode starts with a 20 minute cycle for each drawer.
–
Once all devices in a shelf complete their charge, the corresponding LED indicator
remains ON.
–
• During Charging
Circuit Breaker
21
The Power Switch also acts as a circuit
breaker on the cart. If there is no power
to internal and external outlets, check to
see if the circuit breaker is tripped.
24