5
Installing the Wall Plate
P5080T
Page 6
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Installing the Wall Plate
Introduction
Directional Mounting Arrow
The Directional Mounting Arrow stamped into the
top of the P5080T wall mount indicates which
edge is the top.
Mounting Safety
Two people are recommended to install this
mount.
Wood Stud Installation
You must secure the wall plate to three (3) wall
studs with a minimum of six (6) lag bolts (2 lag
bolts for each stud found).
Use a stud finder to determine the exact center of
wall studs in the vicinity of the wall plate.
®
Use a pencil to mark the exact center of each of the
wall studs.
Step 1
Step 2
Two people are recommended for this step: one
person to level the wall plate and another person
to mark the wall stud location.
Place the wall plate against the wall in the desired
viewing location.
®
Adjust the wall plate to align the mount slots in the
wall plate with the center of the wall studs.
¯
Level the wall plate.
°
Use a pencil to mark the upper-right mounting
location along the center of the wall stud.
If you will be installing your P5080T mount to
wood studs, proceed to the
“Wood Stud
Installation”
section.
If you will be installing your P5080T mount to a concrete
wall, proceed to the
“Concrete Installation”
section.
If you will be installing your P5080T mount to a steel
frame, proceed to the
“Steel Stud Installation”
section.
Determining the Mounting Surface
X
X
X
Conc
rete
Steel S
tud
Wood
Stud
P5080T
Page 6
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Installing the Wall Plate
Introduction
Directional Mounting Arrow
The Directional Mounting Arrow stamped into the
top of the P5080T wall mount indicates which
edge is the top.
Mounting Safety
Two people are recommended to install this
mount.
Wood Stud Installation
You must secure the wall plate to three (3) wall
studs with a minimum of six (6) lag bolts (2 lag
bolts for each stud found).
Use a stud finder to determine the exact center of
wall studs in the vicinity of the wall plate.
®
Use a pencil to mark the exact center of each of the
wall studs.
Step 1
Step 2
Two people are recommended for this step: one
person to level the wall plate and another person
to mark the wall stud location.
Place the wall plate against the wall in the desired
viewing location.
®
Adjust the wall plate to align the mount slots in the
wall plate with the center of the wall studs.
¯
Level the wall plate.
°
Use a pencil to mark the upper-right mounting
location along the center of the wall stud.
If you will be installing your P5080T mount to
wood studs, proceed to the
“Wood Stud
Installation”
section.
If you will be installing your P5080T mount to a concrete
wall, proceed to the
“Concrete Installation”
section.
If you will be installing your P5080T mount to a steel
frame, proceed to the
“Steel Stud Installation”
section.
Determining the Mounting Surface
X
X
X
Conc
rete
Steel S
tud
Wood
Stud
P5080T
Page 6
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Installing the Wall Plate
Introduction
Directional Mounting Arrow
The Directional Mounting Arrow stamped into the
top of the P5080T wall mount indicates which
edge is the top.
Mounting Safety
Two people are recommended to install this
mount.
Wood Stud Installation
You must secure the wall plate to three (3) wall
studs with a minimum of six (6) lag bolts (2 lag
bolts for each stud found).
Use a stud finder to determine the exact center of
wall studs in the vicinity of the wall plate.
®
Use a pencil to mark the exact center of each of the
wall studs.
Step 1
Step 2
Two people are recommended for this step: one
person to level the wall plate and another person
to mark the wall stud location.
Place the wall plate against the wall in the desired
viewing location.
®
Adjust the wall plate to align the mount slots in the
wall plate with the center of the wall studs.
¯
Level the wall plate.
°
Use a pencil to mark the upper-right mounting
location along the center of the wall stud.
If you will be installing your P5080T mount to
wood studs, proceed to the
“Wood Stud
Installation”
section.
If you will be installing your P5080T mount to a concrete
wall, proceed to the
“Concrete Installation”
section.
If you will be installing your P5080T mount to a steel
frame, proceed to the
“Steel Stud Installation”
section.
Determining the Mounting Surface
X
X
X
Conc
rete
Steel S
tud
Wood
Stud
www.seura.com
1.800.95.SEURA
PH. 920.857.9069
FAX 920.857.9490
SCALE
REVISION
DESCRIPTION
BLACK POWDER COAT
1:8
A
AISI 304 STAINLESS STEEL
16 JUL 2018
DRAWN BY
TILT MOUNT ASSEMBLY VIEW
FINISH
Mount Assembly for Illustrations
1060.9
SIZE
1
PART NO.
SHEET 1 OF 2
MATERIAL
K. DEGROOT
DATE
SURFACE AREA
UNSPECIFIED TOLERANCES
FRACTIONAL: 1/16"
ANGULAR: 0.5
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
LASER CUTS: .005"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR
AS A WHOLE, WITHOUT THE
WRITTEN PERMISSION OF
MANUFACTURER, IS PROHIBITED.
2
www.seura.com
1.800.95.SEURA
PH. 920.857.9069
FAX 920.857.9490
SCALE
REVISION
DESCRIPTION
BLACK POWDER COAT
1:8
A
AISI 304 STAINLESS STEEL
16 JUL 2018
DRAWN BY
TILT MOUNT ASSEMBLY VIEW
FINISH
Mount Assembly for Illustrations
1060.9
SIZE
1
PART NO.
SHEET 1 OF 2
MATERIAL
K. DEGROOT
DATE
SURFACE AREA
UNSPECIFIED TOLERANCES
FRACTIONAL: 1/16"
ANGULAR: 0.5
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
LASER CUTS: .005"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR
AS A WHOLE, WITHOUT THE
WRITTEN PERMISSION OF
MANUFACTURER, IS PROHIBITED.
2
Before installation, please note:
The directional mounting arrow punched out of the mount wall
plate indicates which direction is up.
Two people are recommended to install this product.
Determining the Mounting Surface
If you will be installing your Outdoor TV Wall Mount to wood
studs, proceed to the “Wood Stud Installation” section.
If you will be installing to a concrete wall, proceed to the
“Concrete Installation” section.
Step 1
You must secure the wall plate to three (3) wall studs with a
minimum of six (6) lag bolts *2 lag bolts for each stud).
1. Use a stud finder to determine the exact center of wall studs
in the vicinity of the wall plate.
2. Use a pencil to mark the exact center of the wall studs.
Step 2
Two people are recommended for this step: one person to
level the wall plate and another person to mark the wall stud
location.
1. Place the wall plate against the wall in the desired viewing
location
2. Adjust the wall plate to align the mount slots in the wall
plate with the center of the wall studs.
3. Level the wall plate.
4. Use a pencil to mark the upper-right mounting location along
the center of the wall stud.
Wood Stud Installation
