10
P5080T
Installation Instructions
Visit the Premier Mounts website at http://www.premiermounts.com
Page 15
Leveling Screw Adjustment
If your flat panel is tilted too far to one side, the leveling
screws will allow you to compensate for this tilt by
adjusting the screws with a screwdriver.
Loosen both locking screws.
®
Adjust the tilt of your flat panel.
¯
Tighten both locking screws.
Caution!
It is possible to dislodge your flat panel while you
level your flat panel. Use extreme caution until
you tighten the locking screws.
Mounting Bracket Adjustments
Locking Screw Adjustment
After you have finished leveling your flat panel, be sure
to tighten the two (2) M6 x 120mm locking screws.
Do not overtighten the locking screws.
M6 x 120mm
Locking Screw
(1 per Bracket)
M6 x 30mm
Leveling Screw
(1 per Bracket)
Tilt Adjustment
Adjusting the Flat Panel Friction Tilt Angle
Place one hand at the center-top edge of the flat
panel.
®
Place the other hand on the center-bottom edge of
the flat panel.
¯
Using the upper hand, gently pull the top of the
flat panel towards you while the lower hand gently
pushes the bottom of the flat panel away from you.
Adjusting the Flat Panel to the Original Position
Place one hand at the center-top edge of the flat
panel.
®
Place the other hand on the center-bottom edge of
the flat panel.
¯
Using the upper hand, gently push the top of the flat
panel towards the wall while the lower hand gently
pulls the bottom of the flat panel away from the wall.
Mounting Bracket Adjustment
Top Leveling Screw Adjustment
If your TV is not level, the Top Leveling Screws will allow you
to compensate for this tilt by adjusting the screws with a
screwdriver.
1. Loosen both locking screws.
2. Adjust the tilt of your TV.
3. Tighten both locking screws.
Caution: It is possible to dislodge your TV while you level it.
Use extreme caution until you tighten the locking screws.
Bottom Locking Screw Adjustment
After you have adjusted leveling the TV, tighten the two (2)
bottom locking screws.
Do not overtighten the locking screws.
Tilt Adjustment
Adjusting the TV Friction Tilt Angle
1. Place on e hand at the center-top edge of the TV.
2. Place the other hand on the center-bottom edge of the flat
panel.
3. Using the upper hand, gently pull the top of the flat panel
towards you while the lower hand gently pushes the bottom
of the flat panel away from you.
Adjusting the Flat Panel to the Original Position
1. Place on hand at the center-top edge of the flat panel.
2. Place the other hand on the center-bottom edge of the flat
panel.
3. Using the upper hand, gently push the top of the flat panel
towards the wall while the lower hand gently pulls the
bottom of the flat panel away from the wall.
After tilt is adjusted to the desired position, tighten the (2)
tilt locking bolts on each bracket until the brackets are firmly
secured.
Do not overtighten the Tilt Locking Bolts.
P5080
T
Installation Instructions
Visit the Premier Mounts website
at http://ww
w.premiermounts.com
Page 3
Parts List
Installation
Tools
The following tools may be required depending upon your particular installation.
They are not included.
Pencil
Level
¼˝ Drill Bit for
Wood Stud
Electronic Stud Finder
Socket
Wrench
Phillips
Tip Screwdriver
Tape Measure
Hand Held Drill
Hammer**
3
/
8
˝
Concrete Drill Bit*
Protective Eyewear
* Optional tools for concrete installations.
½˝ Socket
M10 Socket*
2
1
5
/16
˝ x 3˝ Lag Bolts
(Qty 6)
Thread Depth Indicator
(Qty 1)
Universal Spacers
Finned Anchors
(Qty 6)
(Qty 24)
5
/16
˝
Flat
Washers
(Qty 6)
Pro Mounting Hardware
Universal
Washers
(Qty 6)
Security Barrel
(Qty 1)
Wall Plate
(Qty 1)
Universal
T
ilt Brackets
(Qty 2)
M6 x 60mm Screws
(Qty 2)
www.seura.com
1.800.95.SEURA
PH. 920.857.9069
FAX 920.857.9490
SCALE
REVISION
DESCRIPTION
BLACK POWDER COAT
1:8
A
AISI 304 STAINLESS STEEL
16 JUL 2018
DRAWN BY
TILT MOUNT ASSEMBLY VIEW
FINISH
Mount Assembly for Illustrations
1060.9
SIZE
1
PART NO.
SHEET 1 OF 2
MATERIAL
K. DEGROOT
DATE
SURFACE AREA
UNSPECIFIED TOLERANCES
FRACTIONAL: 1/16"
ANGULAR: 0.5
TWO PLACE DECIMAL: .03"
THREE PLACE DECIMAL: .015"
LASER CUTS: .005"
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DOCUMENT IS THE SOLE
PROPERTY OF THE MANUFACTURER.
ANY REPRODUCTION IN PART, OR
AS A WHOLE, WITHOUT THE
WRITTEN PERMISSION OF
MANUFACTURER, IS PROHIBITED.
2
Top Leveling Screw
Allows for leveling
adjustments of the TV
after mounting.
Bottom Locking Screw
Prevents the TV from
being removed or
dislodged from the wall
plate.
Tilt Locking
Bolts
