12
RECESSED INPUT/OUTPUT/
LOW VOLTAgE LOCATION
BACk BOx IS SCREW
MOUNTED INTO
FRAMINg MEMBERS
gLASS FACE
1/8” BEAD
(ExCESS
SEALANT
SHOULD SEEP
OUT ON ALL
EDgES WHEN
FULLy ENgAgED)
1) TV ASSEMBLy
Step 3
Install TV Assembly:
A) Place TV assembly face down on a clean, dry surface near the installed
back box. Make all necessary connections and ensure LCD operation is
successful. Tip: Use a small table or stool as near to the installed back
box as possible to reduce wire slack.
B) Before applying adhesive, “dry fit” the TV assembly in back box. Notice
that the gravity lock mounts engage and ensure remote and LCD
functionality in installed position.
C) Remove TV assembly from back box and place face down near back box.
Do not disconnect any wires. Clean any residue from glass and remove
debris.
D) Apply supplied waterproof sealant liberally to glass face edge as shown.
Affix to wall surface, ensuring gravity lock mounts are fully engaged.
Sealant should seep out the front on all edges to provide the best seal.
