10
1-4
Installation
Step 1
Install back box in unfinished wall to framing members using the provided four
screws and washers through screw-mounting slots in back box. Ensure that the
front of the box will be flush with finished wall when installed. Feed power and
other desired cords through pass-through port.
NOTE: Read all installation instructions before beginning installation.
1) BACk BOx
VERTICAL FRAMINg MEMBERS
SCREW
INTO
FRAMINg
MEMBERS
USINg
SCREW-
MOUNTINg
SLOTS (4)
PASS-
THROUgH
PORT
LOW-
VOLTAgE
POWER
AUDIO
VIDEO
Note: Do not overtighten mounting hardware. Back box should fit snuggly between
framing members. If the fit is poor, and overtightening occurs, the back box may
deform, resulting in a poorly sealed installation. If the back box doesn’t fit well
between framing members, shim the framing members for a square and stable fit.