5
2.0
SRIMV Included Parts
Fig. 2-1
Parts Provided
The SRIMV parts list includes:
•
SRIMV Velocity Monitor
•
Accessories: ordered separately
For Velocity and Flow measurement a Pitot tube, averaging probe or flow station is required as an input
to the pressure ports on the SRIMV. Setra offers the following averaging probe.
Averaging Flow sensor: Part # 242915-xx
The SRIMV can be used with any manufacturer’s probe. The “k” factor flow coefficient must be
entered into the SRIMV at commissioning. The default setting as shipped is K=1. K factor changes
based on probe length.
Installation
The 242915-xx units
utilizes 1/4 ̋ ID, 3/8 ̋ OD tubing. First check that t
here are
no sharp bends in the tubing at any connection. Connect the “H” Port to the high input on the SRIMV
units. Connect the “L” Port to the low input on unit.
