28
Examples for Setting up Menu
Example 1: Output mode setting
To enter the menu, press the Menu key to view “Common Configuration. Next, press the
←
button
twice until the
display
indicates output mode. 4-20 mA is the default output mode, if you want to change
to 0-5Vdc or 0-10Vdc press the down arrow and press the return key to select. The display will blink
twice to confirm the setting change.
Continue to press the menu key to progress all the way through the menu until you reach the ESCAPE
screen. Press the Enter key to exit out of the menu and return to home screen.
Example 2.: Setting the password (4 digit numerical) protection
Press the menu key to get the “Common Configure” screen. Next, press the
←
button until reaching the
PASSWORD ENABLE screen. If ENABLE password is chosen, press the MENU button again to get
to the ENTER PASSWORD screen. There will be a prompt to input the password. Using the down
arrow, select each number of the password. In order to move to the next character press the
←
button.
When the input is complete press the
←
button to save the password and complete the setup. When
password protection is enabled, you must enter the correct password before you can enter the menu or
change parameters.
Save the password in a safe location. If you forget the password, use the backdoor password of 0159
and reset the password if desired.
