18
Velocity Alarm Low Limit
Sets the alarm for the low side velocity limit.
Choose “enter” to activate the V Alarm L Limit
menu. The menu will flash, then press the “down
arrow” to select desired digit. Press “enter” to
select and move to next digit.
Velocity Alarm Enable
Enables or disables the velocity Alarm. Choose
“enter” to activate the V Alarm menu. The menu
will flash, then press the “down arrow” to select
desired mode. Press “enter” to select.
Velocity Range
Sets velocity range in either ft/min or m/s.
Choose “enter” to activate the Velocity Range
menu. The menu will flash, then press the “down
arrow” to select desired units. Press “enter” to
select.
If Flow is chosen:
After choosing to display and monitor flow from
the Common Configure section, set the
parameters for that output.
K Factor
The K factor is provided by the manufacturer of
the static pressure probe or Pitot tube and varies
by probe length.
