20
Duct Area
Manually enter the area of the duct where the
probe is mounted. The ducts area is necessary
for calculating the flow rate. The menu will
flash, then press the “down arrow” to select
desired digit. Press “enter” to select and move to
next digit.
Flow Alarm High Limit
Sets the alarm for the high side flow limit.
Choose “enter” to activate the F Alarm H Limit
menu. The menu will flash, then press the “down
arrow” to select desired digit. Press “enter” to
select and move to next digit.
Flow Alarm Low Limit
Sets the alarm for the low side flow limit.
Choose “enter” to activate the F Alarm L Limit
menu. The menu will flash, then press the “down
arrow” to select desired digit. Press “enter” to
select and move to next digit.
Flow Alarm Enable
Enables or disables the flow Alarm. Choose
“enter” to activate the F Alarm Enable menu.
The menu will flash, then press the “down
arrow” to select desired mode. Press “enter” to
select.
If Pressure is chosen:
After choosing to display and monitor pressure
from the Common Configure section, set the
parameters for that output.
Pressure Alarm High Limit
Sets the alarm for the high side pressure limit.
Choose “enter” to activate the P Alarm H Limit
menu. The menu will flash, then press the “down
arrow” to select desired digit. Press “enter” to
select and move to next digit.
