Wedico MF2
43
20. Your notes
16. Instructions for the Wedico MF2
Your Servonaut radio enables
new func-
tions with the MF2
like turning the indicator
off automatically as well as more flexibility in
assigning the softkeys as you like.
•
With the left level switch you can display
the functions 1 to 6.
•
Most light functions already have a
memory function in the MF2. Therefore
the control type [Normal] is set and
should not be changed.
•
The control type [Impulse] ist set for the
indicator right and left with 3s. After a
keystroke the indicator flashes for 3
seconds and then turns off automati-
cally. You can adjust the time as you
like.
•
If you don’t want it to turn off automati-
cally you can change the control type to
[Normal] (flashes as long as the key is
pressed) or the type [Switch -0+] (first
keystroke turns the indicator on, the
second one off).
•
Important:
Switching the indicator on
with your radio is only possible if the
clamp terminal 3 of the MF2 (see
manual MF2) is not connected to the
steering channel. Otherwise the indi-
cator can only be operated with the
steering.
•
Output 5 has a double function and
switches the IR transmitting diode on/off
as well.
•
The control [Fifth wheel] is set to servo
channel 7, you can change that if you
like.
•
You can also change the key assign-
ment with the function [Menu] > [Radio]
> [Swap control].
•
Two functions on one softkey pair can
be swapped with [Menu] > [Control] >
[Reverse]. You may need to edit the
names manually.
Multi Channel Wedico MF2 Output
Wedico MF2 Function
X7a/X8a
Lighting board front & rear
Hazard light / Warning flash
X7b/X8b
Switching channel 3 & 4
Switching channel 3 & 4
X7c/X8c
Switching channel 1 & 2
Switching channel 1 & 2
X7d/X8d
Motor & Horn
Starter & Horn
X7e/X8e
Lighting board front & rear
Indicator left/right
X7f/X8f
Switching channel 5 & 6
Switching function 5 (IR) & 6
X7g/X8g
Lighting board front & rear
Fog light / Rear fog light
X7h/X8h
Lighting board front & rear
Low beam / High beam
•
There are different versions of the MF2.
See the manual of your MF2 for the
detailed functions of the multiswitch
channels - your radio HS16 simulates
only one multiswitch.