Servend Chillz Granitore 1, Service Manual

Page: 20 / 40

20
Installation and Service Manual
USER MAINTENANCE
REMOVING THE BOWL
Removal of every machine bowl is fundamental to ensure correct machine cleaning and sanitization. To remove a
bowl correctly proceed as follows:
1. remove the padlock and take off the lid.
2. raise the front part of the bowl to release it;
3. remove the bowl from its seat by pushing and
tapping lightly on the rear part;
4. take out the auger and remove the seals (a and b).
WASHING AND SANITIZING THE COMPONENTS
All of the previously disassembled and removed components must be thoroughly washed and sanitized.
Important: the sanitizing solution must com-
ply with the regulations in force at the time
the machine is used.
To carry out the procedure correctly, please use the following instructions:
6. Leave the dismantled components to soak in the so-
lution for 30 minutes.
7. Thoroughly wash again with clean water.
8. Place the components on a clean surface and dry
them.
9. Assemble the machine as described.
10. Before using the machine again carry out the rinsing
cycle with clean water .
1. Fill a container with a sanitizer solution mixed in water
(2% of sodium hypochlorite mixed in water).
2. Thoroughly wash the tank, lid and evaporator with a
sponge soaked in the sanitizer solution.
3. Thoroughly wash again with clean water.
4. Fill another container with a sanitizer solution.
5. Dip the dismantled components into the sanitizer
solution.
Warning: do not submerge lids equipped with
lighting in any type of liquid.