Servend Chillz Granitore 1, Service Manual

Page: 19 / 40

Installation and Service Manual
19
USER MAINTENANCE
EMPTYING THE BOWLS
Before a bowl may be cleaned, it must be emptied of the
previously prepared product.
For the sake of simplicity only the operation of the right
bowl will be illustrated; to operate the other bowls simply
carry out the same sequence of steps on the switches of
the bowl in question.
DISASSEMBLING THE DISPENSING TAP
Before removing the bowl it is recommended to disassemble the tap. After cleaning, the tap must not be reapplied
until the bowl has been correctly positioned in its seat. Disassemble the tap and remove the pin (F) from its seat to
release all the other parts. The parts are under spring tension and may pop out.
With the machine switched on, put the freeze/cool change
over switch on “O”, and empty the bowl of all its con-
tents.
After that, turn off both the main switch and mixer switch
and unplug the machine.
These components may be placed in a basin containing
hot water (approx. 50°C); they must later be treated as
described in section.
Never disassemble the tap if the product or any
other liquid is present inside the bowl.