Sequid DTDR-65 Operation Manual Download Page 95

Page: 95 / 111

Push to Reference List:

Open dialog for pushing measurements into

the background

Golden Sample

list (optional,

TDR-compare mode only).

Enumerate Samples:

Enumerate selected samples automatically.

Set Temperature:

Setting temperature for samples manually

(optional for permittivity mode, only for

coaxial probe without temperature sensor).

Create

-Coupon:

Create

test coupon (optional, only avail-

able with

base

and

plus

modules).

Check for Updates:

Checks if the software is up to date.

Connect:

If the device is not connected, press this but-

ton to connect.

Language:

Change the language setting.

Options:

Opens a user dialog for changing options.

Help:

Device Info:

Gives some information about the device

state.

User Manual:

Opens this manual.

Quick Support:

Opens a quick support program to start a

shared desktop session.

Credits:

Show credits for used 3rd party software

packages.

About:

Information about the software.

Summary of Contents for DTDR-65
















































































































Search results

Summary of Contents for DTDR-65

Reviews:

Sequid DTDR-65, Operation Manual, Page: 95 / 111

Search results

Summary of Contents for DTDR-65

Reviews: