tic):
Front page:
Stating overall percentage of ”PASSED measurements”
and a brief overview over the measurement campaign. By default a
signature field is printed to the PDF. This can be replaced by an ”auto-
matic generated” statement (
Seunis.config
:
Suppress signature
in pdf = "true"
).
Summary table:
List showing the results for the individual measure-
ments.
Diagrams:
Impedance traces (incl. tolerance masks) for individual
measurements and additional details in side-tables.
Group statistics:
The user can specify criterions (dialog appears). The
software groups the measurements respectively and shows additional
information for these groups (mean/min./max. impedance and stan-
dard deviation, pass/fail).
Please note:
some specific information for the PDF export can be switched
on/off in the Advanced tab in the Options Dialog (see section
2.
S
11
/
DS
11
Measurements:
The (differential) reflection coefficient
DS
11
and
S
11
are exported to two diagrams: the magnitude (in dB) and the
phase vs. frequency. Additionally an overview table is created.
3. Full 2-Port Measurements:
The magnitude (in dB) vs. frequency of all
S-parameters are exported to four diagrams. Additionally an overview
table is created.
4.
ε
plus
Measurements:
The dielectric constant and impedance vs. fre-
quency are exported. Additionally an overview table is created.
5. Permittivity Measurements:
The complex permittivity is exported to
two diagrams: the real and imaginary parts vs. frequency. Addition-
ally an overview table is created.
75