Remark:
Much earlier versions of this software were called RFQ-Scan. Along with
renaming the software to Seunis the Calibration folder (containing calibration kit
data, company logo and for older devices the SCE measurement mode files) has be
renamed to Config.
3.2 Software Configuration File
Some specialized hidden options and functionalities can only be modified
via the software configuration file
Seunis.config
. The default location of the
configuration file is
C:\Users\<USERNAME>\AppData\Roaming\Sequid
.
3.3 Software Startup
Devices with firmware versions newer than 5.0.1:
The device must be turned
on to operate the device, because the software queries the device for avail-
able measurement modes. Alternatively the software can be started with
an Sequid Viewer Key (optional, ordering code SVK). In this case an inter-
net connection and a valid login account is required (contact
for more information).
Remark for devices with firmware versions 4.1.205 or older: The device
must be connected via the USB cable but not necessarily be switched on.
Make sure the required *.sce measurement files are available in the pro-
grams
Config
subfolder.
3.4 Power Supply & USB Connection
To enable measurements, connect the USB port of the instrument to a com-
puter. Please follow the instructions given below:
•
If available plug the Mini-USB-B plug connector of the USB-cable into
the corresponding USB-jack connector of the device and the USB-A
plug into a USB-port of your computer.
•
Turn on the device by pressing the power button for more than 1 sec-
ond. After a few seconds, the button LED changes from green to red.
11