Sequid DTDR-65 Operation Manual Download Page 74

Page: 74 / 111

9. Import & Export Modules

The software is capable of im- & exporting data to/from various formats.

Some of the so-called

ImExModules

are optional and not included in the

standard software installer. Currently the following

ImExModules

are avail-

able:

•

PDF-Export

•

CSV-Export

•

STLC-Import

•

CIF-Import

Please note:

all software ImExModules (DLLs) have to be located in the Seunis

binary subfolder (usually this is c:

Program Files (X86)

seunis

bin) to be found at

startup.

Please note:

in many cases it can be advantageous to export data in a customer

specific format. The import & export mechanism is based on a modular concept

and the creation of

customer specific ImExModules

is supported. Please contact

[email protected]

for further information.

Info:

exporting of unformatted results (as they can be displayed graphically) is also

possible via the export button of the Result Visualization Window (see section

3.5.3

9.1 PDF-Export Module

The PDF module is currently available for the following measurement modes:

1. TDR/DTDR Impedance Measurements:

When starting the export, the user can select different options to spec-

ify the PDF output (front page, summary table, diagrams, group statis-

Summary of Contents for DTDR-65
















































































































Search results

Summary of Contents for DTDR-65

Reviews:

Sequid DTDR-65, Operation Manual, Page: 74 / 111

Search results

Summary of Contents for DTDR-65

Reviews: