Configuration
Network Configuration
To verify the normal operation of the router check the following LEDs after connecting the
Telephone
To verify the normal operation of the router, check the following LEDs after connecting the
router, modem, and PC with a LAN cable, as follows:
LED
Normal Operation
Actions to take if not illuminated
PWR
ON when connecting adapter
Check for adapter power failure
LAN
ON when cable is connected
Check cable connection and PC power supply
LAN
normally
Check cable connection and PC power supply
PHONE
On when Phone cable is connected
normally
Check cable connection and Telephone
WiMAX
RSSI
Represents WiMAX received signal
strength indication (RSSI), ON when
in router mode
Check that router mode is selected
If one or more LED lights is not in “normal operation”, take the actions specified in the
table.
Install a router after connecting to the network.
If normal connection between router and PC is checked, you have to set up the PC and
router.
PC setup is to control network configuration for Windows 98, Windows 2000, or Windows
XP to use the Internet while the PC is connected to a router.
5
Router setup is to connect a router to the Internet. Please refer to the
CPE Setup
chapter.
