Configuration
How to check your IP address
• To run the Command Prompt, click the Start button at the lower left corner of the
Windows screen. Click Run, then enter “cmd” in the Open box, and click OK.
• When the Command Prompt window opens, enter the “ipconfig” command to verify the
IP address, Subnet mask, and Gateway, which are automatically assigned to PC.
<Run cmd>
[Note]
All PCs connected to CPE will receive their own assigned IP address.
[Note]
If an IP address is not assigned check the following and then restart the PC and
<Verify IP address>
10
[Note]
If an IP address is not assigned, check the following, and then restart the PC and
check whether an IP address is assigned.
LAN cable connection between PC and CPE
Check TCP/IP setup details
