D bl
li k I t
t P t
l (TCP/IP) t
it P
ti
i d
d th
l t
Configuration
• Double-click Internet Protocol (TCP/IP) to open its Properties window, and then select
“Obtain an IP address automatically” and “Obtain a DNS Server address automatically”.
<Select the
‘Obtain an IP address automatically’ ,
‘Obtain a DNS Server address automatically’
and click OK>
<Double-click TCP/IP >
• After completing setup, click OK and close all of the Local Area Connection Properties
After completing setup, click OK and close all of the Local Area Connection Properties
windows.
• When TCP/IP setup is completed, an IP address is automatically assigned by CPE. For
automatic assignment, the PC and the CPE should be connected with a LAN cable. If they
are not connected with a cable, connect them with a LAN cable and restart the PC.
• You can check the automatic IP address assignment by using the ipconfig command
from the Command Prompt.
9
