CPE Setup on the web page
• This will take several minutes, and time will vary according to the environment.
• In some case, a pop-up window asking to rebuild the system will be opened due to a
version difference. If this occurs, click “Yes” to rebuild the system.
• CPE is rebooted automatically after the upgrade process is complete.
[Caution]
To avoid failure of the CPE, do not power off the CPE during the upgrading
process.
Admin (Reboot/Default Setting)
• Select “Admin”
→
“Reboot/Default Setting” from the menu.
• Select “Reboot” to reboot the CPE.
• Select “Reset to all default settings” to reboot the CPE and initialize CPE configuration.
• To reboot the CPE, click “Apply”.
• The CPE is rebooted automatically. This takes about 40 seconds.
22
