SEOWON INTECH SWC-1104, User Manual

Page: 28 / 74

28
4. Multi User CPE Internet Connection with Internet Setup
Wizard
This chapter describes how to connect MULTI USER CPE to Internet. Internet connection setup is made by
accessing to internal web setup screen. Therefore, Internet connection setup can be done from one of PCs
connected to the MULTI USER CPE by executing just once.
To access to the web server built in the MULTI USER CPE, you have to set up PC normally.
For details how to set up PC, refer to Chapter III of this manual.
Internet connection setup is possible through internal web server in the MULTI USER CPE.
The Chapter IV describes how to proceed Internet setup by using this web server.
When completing the setting of PC and MULTI USER CPE according to the instructions from Chapter II to
Chapter IV, you can use Internet from the PC connected to MULTI USER CPE.
In case of the cable modem mode Internet service environment, proceed the Chapter II of this manual and
then turn off power to both modem and router. Turn the modem on and next the router on when linked after
about 1 minute, then they will be connected without any separate setup.
- It may not connected immediately depending on user environment, and follow the instructions of this
Chapter IV.