25
3.3 Windows XP Setup
- To run the Command Prompt, click the Start button on the lower left corner of Windows screen and click
Run to enter
“
cmd
”
in the Open box, and then click OK button.
-
When the Command Prompt runs, enter the
“
ipconfig
”
command to verify IP address, Subnet mask, and
Gateway, which are automatically assigned to PC
.
[
Note
]
All PCs connected to
MULTI USER CPE
will get each of assigned IP addresses respectively
.
IP Address: 192.168.1.10 ~ 60
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
[
Note
]
If IP address is not assigned normally, check the following and restart PC so as to check
if the IP address is assigned
.
-
LAN cable connection between PC and MULTI USER CPE
-
Check TCP/IP setup details
-
Whether or not to remove ADSL access program
(Broadband Connection icon)
<Run cmd>
<Verify IP address>
Summary of Contents for SWC-1104
