SEOWON INTECH SWC-1104, User Manual

Page: 18 / 74

18
3.2 Windows 2000 Setup
This procedure is to restore Windows 2000
’
s TCP/IP setup to default values. If Windows is not
installed for the first time in PC or Internet is not operated properly, check all values are normal
according to the following.
After completing the TCP/IP setup of PC, to check if IP address is obtained from MULTI USER
CPE automatically, connect PC and MULTI USER CPE with a LAN cable according to the
instructions of Chapter II and keep MULTI USER CPE turned on before Windows setting up. Click
on the Windows Start button, select Settings >> Control Panel on the menu and then double-click
the
“
Network Connections
”
icon.
<Double-click the Local Area Connection >
- Click Properties from the Local Area Connection window.
- Double-click Internet Protocol (TCP/IP) from the Properties window.