Sentry The Guardimals Owner'S Manual Download Page 83

Page: 83 / 94

- Slide the metal harness retainer

through

th e h arness slot opening in the Seat Pad
an d Seat Base.

- Pull the metal harness retainer

down

th rou gh the harness slot on the shoulder

from the bottom of the Seat Base,

position

the

metal harness retainer

ﬂat

ag ai nst the Car Seat and pull on the

ha rn ess strap to remove all slack.

- Check that the

metal

harness

retainer

ﬂa

a nd belt is not twisted.

- Repeat for other harness strap and

Crotch Belt.

10.0 Operation and Adjustments

c. Secure harness straps to Back Support.

- Thread the Harness Strap through the

Harness Slots in the Seat Pad and
Back Support at the height at or just

above the child's shoulders.

Note: Make sure that the Harness

Straps are through the Harness Strap
Slots at the same height in the Back
Support pad and the Back Support.

- Thread

Harness

Strap Covers over

Safety

Harness Straps.

They

are required for

Thread

Velcro

Straps

Covers through

the

same harness slot as the harness

strap goes through. Secure Velcro Straps

together to hold in place.

Summary of Contents for The Guardimals































































































Search results

Summary of Contents for The Guardimals

Reviews:

Related manuals for The Guardimals

Brands by name

Popular brands

Sentry The Guardimals, Owner'S Manual

Search results

Summary of Contents for The Guardimals

Reviews:

Related manuals for The Guardimals

Brands by name

Popular brands