Sentry The Guardimals Owner'S Manual Download

Page: 63 / 94

DEATH or SERIOUS INJURY can occur

• Child

must be at least 4 years old and

weigh at least 40 lbs. (18 kg) to use the
Backless Booster Car Seat.

• Use High-back Booster mode as long as

possible. The Back Support and Head
Support provide incremental crash
protection in frontal and side impact
crashes. Removing the Back Support and
Head Support earlier than necessary also
removes the incremental crash protection.

• Vehicle lap/shoulder belt must be properly

positioned on child. Use vehicle shoulder belt
positioner to center vehicle shoulder belt on
child’s shoulders.

• Discontinue use of the Backless Booster Car

Seat when the top of the child’s ears are above
top of the vehicle seat back or vehicle headrest.

WARNING!

8.2 Backless Booster Car Seat (

Built-in

WITHOUT

Harness) Installation and Use

To secure car seat and your child:

1. Remove harness system and seat back support (see “Harness

Removal and Assembly” section and “Assembly and Removal for

Back

support” section.

8.0 Booster Car Seat (

Without

Built-in

Harness) Installation and Use

Summary of Contents for The Guardimals































































































Search results

Summary of Contents for The Guardimals

Reviews:

Related manuals for The Guardimals

Brands by name

Popular brands

Sentry The Guardimals, Owner'S Manual

Search results

Summary of Contents for The Guardimals

Reviews:

Related manuals for The Guardimals

Brands by name

Popular brands