Sentry The Guardimals Owner'S Manual Download Page 45

Page: 45 / 94

To secure car seat in vehicle:

“Assembly and Removal of Back

Support” section).

2. Store LATCH and Top Tether by

Assembly the Back Support (see

securing LATCH Connectors and
Tether Hook on LATCH/Tether
Storage at bottom of Back
Support as shown.

3. Adjust the harness strap height for your

child – Harness straps MUST be at or
above the child’s shoulders (see
“Changing Harness Strap Height” section).

7.4.2 Installation - Lap/Shoulder Belt

Top

Tether

WITHOUT

WARNING!

• Vehicle seat belt system MUST stay tightly adjusted to car

se at at all times. If vehicle seat belt does not stay tight, read
ve hicle owner’s manual and “Vehicle Seat Belts’ section in
th is manual.

LATCH Connectors

Top Tether

Tether/LATCH

Storage

7.0 Toddler Car Seat (

With

Built-in

Harness) Installation and Use

Summary of Contents for The Guardimals































































































Search results

Summary of Contents for The Guardimals

Reviews:

Related manuals for The Guardimals

Brands by name

Popular brands

Sentry The Guardimals, Owner'S Manual

Search results

Summary of Contents for The Guardimals

Reviews:

Related manuals for The Guardimals

Brands by name

Popular brands