The RAD Getting Started Guide
Getting Started
7
DO NOT
remove your SentriCard® from the RAD during the
renewal process. Removing the SentriCard® from the RAD
during the renewal process may cause damage to the
SentriCard®.
Once the renewal is complete, the RAD will return to the
Main Menu.
The RAD’s SentriCard® renewal feature does not require a lockbox.
Note
: To renew your SentriCard®, you must have your
SentriCard® in a charged RAD with cellular service.
Last update to this topic: July 10, 2012.
Using the RAD to Send Showing Notifications
Showing notifications tell the lockbox owner who has shown their
listing(s). Each time you access a lockbox with your SentriCard® or
Your PIN and You’re In
, showing information is sent to your
SentriCard® or RAD.
Note
: If you have accessed an NXT Wireless lockbox, with
firmware 24.35 or higher, the lockbox will send the access
information directly to the RAD and the RAD will send the
information to the
SentriLock Server
. It is not necessary to
insert your SentriCard® into the RAD. If you are accessing a
previous version of lockbox, you will need to insert your
SentriCard® into the RAD to send showing information.
It is important to assign your lockbox to the listing address. When a
lockbox is assigned to a listing, you can easily identify the property
that has been shown. If you do not assign a lockbox to a listing, you
will see the lockbox serial number, rather than the address in the
showing notification. For more information on assigning your
lockbox to a listing address, see the
How to Assign a Lockbox to a
Listing
topic in the
SentriLock System Guide
. You can view the
System Guide from:
https://lockbox.sentrilock.com/manuals/systemguide/default.htm
.
