background image

2   Specifications

MAGLIFE LOCK

USER’S GUIDE

ELECTROMAGNETIC LOCK

1   Description

The Electromagnetic Lock (Maglife) series is a surface mounted magnetic lock assembly.  It is a narrow profile model available in single 

and dual lock varieties and various sizes (force) designed for standard installation on most types of doors.

DESCRIPTION

10MAGLIFELOCK9

Holding Force

                         (lbs)

100

Imput Voltage                       

(VDC)

12 to 24

Current Draw:

   @ 12 VDC (amps)

@ 24 VDC (amps)

0.06

0.12

Dimensions:                        

inches

 (mm)

2.76 x 1.40 x 0.79

(70 x 35 x 20)

Weight:                                      

lbs

(kg)

0.55

0.24

Material:                    

Lock Housing

Armature / Strike Plate

Aluminum

Zinc Plated Steel

75.5293.03 

 

 

20090317 

         

Page 

of 

2

3   Precautions

Shut off all power going to header before attempting any wiring procedures.

Maintain a clean & safe environment when working in public areas.

Constantly be aware of pedestrian traffic around the door area.

Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door.

Always check placement of all wiring before powering up to insure moving door parts will not catch any wires and cause damage to equipment.

Ensure compliance with all applicable safety standards and building codes upon completion of installation.

4   Installation Tips

1.

DO NOT touch the lock face with your hands.

2.

Should the surface plating be damaged, use a soft, clean dry cloth or abrasive cloth to clean the lock face.  DO NOT use sand paper.  A rust inhibitor can the be 

applied to the armature/strike plate and maglock assembly face.

10MAGLIFELOCK9

CAUTION

THE 10MAGLIEFLOCK9 IS DESIGNED TO BE 

USED WITH A DC POWER SOURCE ONLY.

DO NOT ATTEMPT TO USE THIS PRODUCT 

WITH A 24V STEP DOWN TRANSFORMER AND 

A BRIDGE RECTIFIER OR SERIOUS DAMAGE 

WILL OCCUR TO THE MAGLOCK.  A 24V 

STEP DOWN TRANSFORMER AND BRIDGE 

RECTIFIER CIRCUIT WILL YIELD VOLTAGE  

ABOVE 29V, WHICH EXCEEDS THE LIMITS OF 

THE SPIKE SUPPRESSION CIRCUIT IN THE 

MAGLOCK, CAUSING PRODUCT FAILURE.

IT IS HIGHLY RECOMMENDED THAT ONLY A 

FILTERED DC POWER SOURCE BE USED TO 

POWER THE 10MAGLIFELOCK9.

Reviews: