manualshive.com logo in svg

Sensotec Rapidox 1100L, Instruction Manual, Page: 33 / 49

Share
Download
Sensotec Rapidox 1100L Instruction Manual Download Page 33

Cambridge Sensotec Rapidox 1100L Oxygen Analyser Instruction Manual 

 
 

 

 

8.10.2

 

Check for Updates 

 

This function will check online and advise you if any software updates are 
available for your machine.  This function is not automatic.  To update the 

software please visit www.cambridge-sensotec.co.uk and select the support page 
where a list of downloads are provided. 
 

8.10.3

 

Image Grabber 

 

This is a simple function to allow the user to copy the software screens into the 
Windows clipboard.  This is useful for diagnosing problems; allowing a quick and 
simple way of sending the Sensotec technicians actual screen shots of the 

software.  To recover the images simply press CTL+V to paste. 
 

 

9.

 

Rapidox Data-Logging Software 

 

9.1

 

Introduction 

 

The Rapidox software includes a full data logging facility.  Data can be saved to a 
file automatically at regular intervals and the format is compatible with modern 

spreadsheet programmes such as MS-Excel.  A live-time graphing facility is also 
included which has many powerful features.  Note that the data logging facility 
will only function if the analyser is in NORMAL run mode, and will be suspended 

automatically during start up or if the set up menu has been activated via the front 
panel keypad. 

 

9.2

 

Setting up the Data Logger 

 
Click on the tab labelled ‘Data Acquisition’ to display the following page: 
 

 
 
Version 1.6 

29 

Last printed 16/11/2011 16:59:00 

 

Summary of Contents for Rapidox 1100L


















































Reviews:

No comments