Sensaphone IMS-1000, User Manual, Page: 56 / 112

IMS-1000 Manual
56
“Enter User Code to acknowledge:” {valid User Code is received}
“Alarm Acknowledged. ” {main menu}
Call-in Alarm Acknowledgment
If you receive an alarm message on your pager or in your voice mail, you can still acknowledge the
alarm by calling the unit back and entering your User Code. Note that the Intercall Delay must be
set to at least
1 minute in order for the unit to answer a call.
When you call in to the unit, wait for the beep and then press a button on your touch-tone tele-
phone. If there are unacknowledged alarms, the unit will say “Unacknowledged alarms exist". Then
listen to the following menu and choose the appropriate option. When the unit finishes announcing
all of the alarms, it will say “Enter your user code.” If the user code is entered correctly the unit
will say “Alarm acknowledged” and it will acknowledge all of the alarms announced, and stop dial-
ing all voice contacts.