Sensaphone IMS-1000, User Manual, Page: 37 / 112

Chapter 2: Configuration
37
ic pager destination, enter your service provider’s TAP modem phone number followed by the letter
A and then the pager ID or cell phone number.
Example : (610)555-4500-A-0504099
Contact your service provider if you do not know the data/modem telephone number or the pager
ID for your alphanumeric pager.
Here are several TAP terminal telephone numbers for the major cell phone carriers:
AT&T: (866)883-7243
Cingular: (800)469-5351
Nextel: 800-201-2501
Sprint: (888)656-1727
T-Mobile: (800)506-6885
Verizon: (866)823-0501
Fax Calls
Enter the telephone number of the fax machine.
E-mail
Enter the e-mail address.
SNMP
Enter the SNMP server name or IP address.
Connect Environmental Sensors
Once you’ve configured the Input Templates, connect your sensors. This will automatically load the
template programming for each sensor. All sensors connect to the IMS-1000 via RJ45 connectors.
This allows you to use your existing structured cabling for wiring sensors throughout your infra-
structure. The template programming will automatically load for each sensor as they are plugged in.
NOTE: IMS sensors are not IP devices and cannot connect to network Hubs or Switches.
After connecting your sensors, customize the input alarm parameters for each sensor.