12
Ejection of used lancet
Note:
this lancing device has an ejection feature, so you do not have to pull out the
used lancet.
Remove the lancing device cap
Remove
the
cap
by
turning
it
counterclockwise and then pulling it straight
off of the device.
Cover the exposed lancet tip
Before removing the lancet, place the lancet
protective cover on a surface then push the
lancet tip into the cover.
Eject the lancet
Slide the ejection control forward until the
lancet comes out of the lancing device.
Replace the lancing device cap
Place the cap back onto the device; turn
clockwise to secure the cap.
