8
Instructions for use
Step 1:
Remove the lancing device cap
Remove
the
cap
by
turning
it
counterclockwise and then pulling it straight
off of the device.
Step 2:
Insert a sterile lancet into the lancing
device
Position the lancet as shown in picture, so
that the lancet fits into the lancet holder.
Push the lancet into the device until it snaps
into place and is fully seated in the holder.
Remove the protective layer cover of lancet
Step 3:
Replace the lancing device cap
Place the cap back onto the device; turn
clockwise to secure the cap.
Step 4:
Adjust the depth setting
This lancing device has 9 puncture depth
settings. Set the lancing device level 1 or 2 for
normal skin thickness, 3 or 4 for thick skin
and so on.
