3
1. Important information about your
Lacto Spark Blood Lactate Monitoring System Intended Use
The Lacto Spark Meter System is intended for by health-care professionals to
quantitatively measure lactate in whole blood to evaluate physical performance
and/or to establish a proper intensity of exercise for athletes. The device system is
for
in-vitro
diagnostic use only.
Note:
The Lacto Spark meter should only be used with Lacto Spark test strips. Using
other test strips with the meter can produce inaccurate results.
Do use the Lacto Spark system for:
Testing blood lactate.
Testing only with fresh capillary whole blood samples.
Warning:
The Lacto Spark system contains small parts that may be dangerous if swallowed.
Caution:
Please read all the instructions provided in this owner’s booklet and practice the
testing procedures before using the Lacto Spark system. Blood Lactate monitoring
should be done with the guidance of a health care professional.
Test Site
You can test only on fingers.
Lacto Spark System uses 0.5µL sample
From the above figure shows the area where you can test with the Lacto Spark
system.
Finger Tips
