background image

 

 

 

 

 

 

 
 

 

               SENS Limited Warranty Policy 

 

 

 

What is covered: 

This warranty covers any defect in material and workmanship on battery chargers manufactured 
by Stored Energy Systems, a Colorado Limited  

 

Liability Company (SENS).   
 

 

What this warranty does not cover: 

This warranty does not cover damages, defects or failures of your equipment resulting from 
shipping damage, accidents, installation errors, unauthorized adjustment or repair, unauthorized 
third-party service, failure to follow instructions, misuse, fire, flood, acts of persons not in our 
control, and acts of God.   
 

For how long: 

Two years from date of shipment. 

 

 

What we will do: 

If your battery charger is defective within two years of date of shipment, we will repair it or, at 
our option, replace it at no charge to you.   
 
If we choose to replace your charger, we may replace it with a new or refurbished one of the 
same or similar design.  The repair or replacement will be warranted for the remainder of the 
original two-year warranty period.  If we determine that your charger cannot be repaired or 
replaced, we will refund its purchase price to you. 
 

What we ask you to do: 

First contact SENS service department to obtain warranty service  

instructions.  To obtain 

warranty service the product must be returned, freight prepaid, to the factory under a Return 
Merchandise Authorization  

(RMA) number provided by SENS.  If, in SENS’ opinion, the 

problem can be rectified in the field, SENS may elect to ship replacement parts for customer 
installation instead of having the product returned to the factory.   
 

 

Limitation: 

This warranty is limited to defects in material or workmanship of the product.  It does not cover 
loss of time, inconvenience, property damage or any consequential damages.  Repair, 
replacement or refund of the purchase price of the equipment is your exclusive remedy.   
 
Form.135-1 

Summary of Contents for F3 SERIES





















Reviews: