The location of peripherals should be decided upon, consideration for operator
safety and comfort should be observed and the length and location of data
cables to each peripheral device should be considered.
The ROBOT/SHOP/SCAN POS 3/4/5/6/7 power supply is usually mounted
underneath the countertop, ensure there is adequate area around the power
supply for ventilation and it is oriented so that the cables, switches and
indicators are easily accessible. Again this is entirely dependent on counter
configuration.
Once the installation method and configuration has been chosen,
modifications to the counter can be made using each peripheral
manufacturer's installation instructions. Remember to allow for cable runs
through the countertop and any shelving. Usually there will be two cables per
device, one for power and one for data.
4. REGULAR MAINTENANCE
To ensure reliable operation, the ROBOT/SHOP/SCAN POS 3/4/5/6/7 should
be regularly maintained, cleaning both internally and external, and checking
that all connections are secure and no cables are damaged
4.1 Cleaning
The ROBOT/SHOP/SCAN POS 3/4/5/6/7 should be cleaned with a soft slightly
damp cloth, do not use solvents or abrasives and do not spray any substance
directly onto the POS terminal.
The touch screen should be cleaned with a soft, slightly damp cloth in a
circular motion, from its center to outer edges.
4.2 Touch Screen
Caring For The Touch Screen
To keep the touch screen in good working order, use only the ball of the finger
to activate onscreen buttons, never use pins, pens, pencils or the like on the
20
