12 |
SKM 300 G3
Using the radio microphone
Using the radio microphone
To establish a transmission link, proceed as follows:
1. Switch the radio microphone on (see next section).
2. Switch the receiver on (see the receiver’s instruction
manual).
The transmission link is established and the display
backlighting of the receiver changes from red to
orange.
If you cannot establish a transmission link between
transmitter and receiver, read the chapter
“Synchronizing the radio microphone with a receiver”
on page 29.
Switching the radio microphone on/off
CAUTION
Reduced transmission power!
If you touch the antenna
of the radio microphone,
the transmission power will be considerably reduced!
Only hold the radio microphone by its body.
It is vital to observe the notes on frequency
selection on page 29.
8
C
0
3