INSTRUCTIONS
HAND MICROPHONE
HM-218
PRECAUTIONS
CAUTION:
DO NOT
use harsh solvents such as Benzine or
alcohol when cleaning, as they
will
damage the microphone’s
surfaces.
DO NOT
place or leave the microphone in direct sunlight or
in areas with extremely high or low temperatures
for long
periods
of time.
TURN OFF
the transceiver when connecting or
disconnecting
the microphone.
NEVER
immerse the connector in water. If the connector
becomes wet,
BE SURE
to dry it before connecting it to the
transceiver.
After inserting the plug into the microphone jack, turn the
screw cap clockwise to firmly tighten it.
KEEP
the connector cap
on
the separation cable’s
connector when the microphone is not connected.
NOTE:
Refer to the RMK-5’s instruction manual for details
on connecting the microphone to the separation kit
.
REQUIREMENTS
SUPPLIED ACCESSORIES
•
RMK-5
separation
kit
•
OPC-2373
or
OPC-2374
separation
cable
Icom is not responsible for the destruction, damage to, or
performance of any Icom or non-Icom equipment, if the
malfunction is because of:
•
Force majeure, including, but not limited to, fires,
earthquakes, storms, floods, lightning, other natural
disasters, disturbances, riots, war, or radioactive
contamination.
• The use of Icom products with any equipment that is not
manufactured or approved by Icom.
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that in the European Union, all electrical and
electronic products, batteries, and
accumulators (rechargeable batteries) must be
taken to designated collection locations at the
end of their working life. Do not dispose of
these products as unsorted municipal waste. Dispose of
them according to the laws in your area.
DISPOSAL
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United Kingdom,
Germany, France, Spain, Russia, Australia, New Zealand, and/or other
countries.
HM-218
Transceiver’s
main unit
Separation cable
(Purchase separately)
Separation kit’s
front panel
Thank you for choosing this Icom product
.
READ ALL INSTRUCTIONS
carefully and completely
before using this product.
Microphone hanger*
1
Self-tapping screws
Connector cap*
2
Mounting base
*
1
Connect the microphone
hanger to the vehicle’s ground
using the self-tapping screws
for microphone ON/OFF hook
functions.
WORD
DEFINITION
CAUTION
Equipment damage may occur.
D
Explicit definitions
*
2
Put the connector cap on the separation cable’s connector
when the microphone is not connected.
