32 |
SKM 300 G3
If a problem occurs ...
If a problem occurs ...
If a problem occurs that is not listed in the above table
or if the problem cannot be solved with the proposed
solutions, please contact your local Sennheiser partner
for assistance. To find a Sennheiser partner in your
country, search at www.sennheiser.com under “Service
& Support”.
Problem
Possible cause
Possible solution
Radio
microphone
cannot be
operated,
“
Locked
”
appears on
the display
panel
Lock mode is
activated
Deactivate the lock
mode (see page 14).
No operation
indication
Batteries are flat
or accupack is flat
Replace the
batteries or
recharge the
accupack
(see page 8).
No RF signal
at the
receiver
Radio microphone
and receiver are
not on the same
channel
Set the radio
microphone to the
same channel as the
receiver.
Synchronize the
radio microphone
with the receiver
(see page 18).
Transmission
range is exceeded
Reduce the distance
between radio
microphone and
receiving antennas.
Increase the
transmission power
(see page 26).
Activate the RF
signal
(see page 15).
RF signal is
deactivated
(“
RF Mute
”)
RF signal
available,
no audio
signal,
“
MUTE
”
appears on
the display
panel
Receiver’s squelch
threshold is
adjusted too high
Reduce the squelch
threshold setting on
the receiver.
Radio microphone
doesn’t transmit
a pilot tone
Activate or
deactivate the pilot
tone transmission
(see page 27).
Audio signal
has a high
level of
background
noise or is
distorted
Radio
microphone’s
sensitivity is
adjusted too low/
too high
Adjust the input
sensitivity
(see page 22).
