Sennheiser SKM 300 G3, Instruction Manual

Page: 16 / 39

SKM 300 G3 | 15
Using the radio microphone
Muting the audio signal or deactivating
the RF signal
The MIC button
3
allows you to mute the audio signal
or to deactivate the RF signal.
Via the “ Mute Mode ” menu item, you can set the
desired function of the MIC button
3
:
From the “ Mute Mode ” menu item, select the desired
setting (see page 25).
Exit the operating menu.
Briefly press the MIC button
3
or keep it pressed.
The radio microphone reacts as indicated in the table.
Setting MIC button
3
... Function
“ AF On/
Off ”
Press briefly Mutes the audio signal
permanently
Unmutes the audio
signal permanently
“ RF On/
Off ”
Press briefly Deactivates the RF
signal
(offline operation)
Activates the RF signal
(online operation)
“ Push To
Mute ”
Keep pressed Mutes the audio signal
temporarily (cough
function)
“ Push To
Talk ”
*
*
If you select “ Push To Talk ”, the radio microphone will be
permanently muted until until you press the MIC button.
Keep pressed Unmutes the audio
signal temporarily
(speech function)
“ Disabled ” No function
The current state of the muting function or the
RF signal is displayed on the radio microphone’s
display panel (see next section).
An additional display appears on the receiver’s
display panel
• when the pilot tone function is activated on
both radio microphone and receiver and,
in addition,
• this display has been activated via the
receiver’s “
Warnings ” menu item (see the
receiver’s instruction manual).
3