Testing the headset system and the sound quality
SD Series - User Guide
| 17
Pairing the headset and the base station
Upon delivery, the headset and the base station are already paired. You
only have to pair the headset with the base station if you have purchased
the headset and base station separately or if you want to hold a confer-
ence call.
“easy pairing” – Pairing the headset and the base station
왘
Place the headset into the magnetic holder of the base station.
The Headset LED alternately flashes red and blue. If pairing is suc-
cessful, the Headset LED flashes 3 times blue and then lights up contin-
uously, indicating that the base station and the headset are paired.
If the Headset LED flashes 3 times red and then goes off, start a new
pairing attempt by placing the headset again into the magnetic holder of
the base station.
Establishing a wireless link
왘
Press the Link button on the headset or press the backlit button (either
PC
or Phone ) on the base station. The link is established. The Link
LED
on the base station lights up blue and the Headset LED flashes
blue slowly.
Disconnecting a wireless link
왘
Press the Link button on the headset or press the backlit button (either
PC
or Phone ) on the base station. The link is disconnected. The
Link LED
on the base station and the Headset LED go off. The headset
is in standby mode.
If your telephone has a built-in electronic hook switch supporting
the MSH standard, you can only disconnect the wireless link between
headset and base station by placing the headset into the base
station.
3x
