![background image](http://html1.mh-extra.com/html/sennheiser/evolution-skm-100-g3/evolution-skm-100-g3_instruction-manual_1241814020.webp)
Using the devices
19
Synchronizing a transmitter with the diversity receiver
You can synchronize a suitable transmitter of the ew 100 G3 series with the diversity
receiver. During synchronization, the following parameters are transferred to the trans-
mitter:
To switch your transmitter
on
and to
deactivate the RF signal on switch-on
(offline operation):
SK 100 G3
SKM 100 G3
SKP 100 G3
Keep the
ON
/
OFF
button
pressed until
“
RF Mute On?
” appears
on the display panel.
Press the
SET
button
.
Keep the
ON
/
OFF
button
pressed until
“
RF Mute On?
” appears
on the display panel.
Press the multi-function
switch
.
Keep the
ON
/
OFF
button
pressed until
“
RF Mute On?
” appears
on the display panel.
Press the
SET
button
.
The transmission frequency is displayed but the transmitter does not transmit an
RF signal.
The transmission icon
is not displayed.
To
activate
the
RF signal
:
Briefly press the
ON
/
OFF
button
.
“
RF Mute Off
” appears
on the display panel.
Press the
SET
button
.
The transmission icon
is displayed again.
Briefly press the
ON
/
OFF
button
.
“
RF Mute Off
” appears
on the display panel.
Press the multi-function
switch
.
The transmission icon
is displayed again.
Briefly press the
ON
/
OFF
button
.
“
RF Mute Off
” appears
on the display panel.
Press the
SET
button
.
The transmission icon
is displayed again.
MHz
533.875
ew100 G3
MUTE
P
AF
MHz
533.875
ew100 G3
MUTE
P
AF
MHz
533.875
ew100 G3
MUTE
P
AF
Use this function to save battery power or to prepare a transmitter for use during
live operation without causing interference to existing transmission links.
Setting
Transferred parameters
“
Frequency Preset
”
Currently set frequency
“
Name
”
Freely selectable name currently set on the receiver
“
Pilot Tone
”
Current pilot tone setting of the receiver (“
Inactive
”/“
Active
”)
ew 100 P G3 Set _529660_0309_Sp9.book Seite 19 Mittwoch, 8. April 2009 6:57 18