Using the devices
20
To transfer the parameters:
Switch the transmitter and the diversity receiver on.
On the receiver, call up the “
Sync
” menu item.
“
Sync
” appears on the display panel of the diversity receiver.
Place the infra-red interface of the transmitter (see page 5 to page 7) in front of the
infra-red interface of the diversity receiver
.
The parameters are transferred to the transmitter. When the transfer is completed, “
”
appears on the display panel of the diversity receiver. The receiver then switches back to the
current standard display.
To cancel the transfer:
Press the
ON/OFF
button
on the diversity receiver.
“ ” appears on the display panel of the receiver. “ ” also appears if no suitable trans-
mitter was found (wrong frequency range/wrong generation).
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “
Auto Lock
” menu item (see
page 23). If the lock mode is activated, you have to temporarily deactivate it In order to be
able to operate the devices:
EK 100 G3/SK 100 G3
SKM 100 G3
SKP 100 G3
Press the
SET
button
(EK) or
(SK).
Press the multi-
function switch
.
Press the
SET
button
.
“
Locked
” appears on the display panel.
Press the rocker
button
(EK) or
(SK).
Move the multi-
function switch
upwards/downwards.
Press the
UP
button
/
DOWN
button
.
“
Unlock?
” appears on the display panel.
Press the
SET
button
(EK) or
(SK).
Press the multi-
function switch
.
Press the
SET
button
.
The lock mode is temporarily deactivated.
P
ew 100 P G3 Set _529660_0309_Sp9.book Seite 20 Mittwoch, 8. April 2009 6:57 18