Product overviews
8
Overview of the displays of the EK 100 G3
After switch-on, the diversity receiver displays the standard display “
Frequency/Name
”.
For further illustrations and examples of the different standard displays, refer to page 22.
The display backlighting is automatically reduced after approx. 20 seconds.
Display
Meaning
햲
RF level “
RF
”
(Radio Frequency)
Diversity display:
Antenna input I is active
Antenna input II is active
RF signal level:
Field strength of the received signal
Squelch threshold level
햳
Audio level “
AF
”
(Audio Frequency)
Modulation of the transmitter
Peak hold function
When the display shows full deflection, the audio
input level is excessively high.
햴
Frequency
Current receiving frequency
햵
Name
Freely selectable name of the receiver
햶
Lock mode icon
Lock mode is activated
햷
Battery status
Charge status:
햸
Muting function
“
MUTE
”
or
“
Mute
” is only displayed on the “
Frequency/Name
” standard
display (see page 22) when no RF signal is being received.
The diversity receiver then does not output an audio signal.
line output level
AF OUT
The line output level
AF OUT
is only displayed on the
“
Frequency bank/Channel/Name
” standard display
(see page 22).
햹
Pilot tone “
P
”
Activated pilot tone evaluation
MHz
533.875
ew100 G3
P
AF
RF
MUTE
햲 햳
햴
햵
햶
햷
햸
햹
RF
AF
approx. 100%
approx. 70%
approx. 30%
Charge status is critical; in addition,
the red
LOW BATT
LED
쐋
is flashing.
EW100_P_Set_US_PRT.fm Seite 8 Donnerstag, 9. April 2009 12:14 12