background image

10  |  CX True Wireless

green/red?

By default, the left and right earbud are peer paired to each other and 
connect automatically after power-on. If the LED indicator is alter-
nating green/red, this earbud is not peer paired, i.e. the left and right 
earbuds are not connected to each other. 

In this case perform the following steps to pair both earbuds:

1. Make sure that the earbuds are not connected to any Bluetooth

 

device. Deactivate Bluetooth on your Bluetooth device or delete

 

“CX True Wireless” from the list of paired devices in the Bluetooth

 

menu of your Bluetooth device.

2. Charge the right and the left earbud.

3. Take one earbud out of the charging case.

The LED of the earbud lights up red.

4. Press and hold the touch control panel for 10 seconds until you

 

hear the voice prompt “Pairing” and a beep sound.
The LED of the earbud flashes green and red. The earbud is in ear-
bud pairing mode.

5. Now take the second earbud out of the charging case and make

 

sure that the right and the left earbud are close together (max. 
distance 50 cm).

6. Press and hold the touch control panel of the second earbud for 

10 seconds until you hear the voice prompt “Pairing” and a beep

 

sound.
If pairing was successful, you hear the voice prompt “Pairing suc-
cessful” and the LEDs of the earbuds flash blue 3x. The earbuds

 

are paired with each other and the factory default settings are

 

restored.

Now pair the earbuds with your Bluetooth device.

Are there reasons why the earbuds may not recharge as usual?

Answer:

Ensure that the charging contacts of the earbuds and the charging 
case are clean. If charging is still not possible, perform a reset and a 
factory reset of the earbuds.

How can I adjust the earbuds to a comfortable volume or make 
them louder?

Answer:

For some Android smartphones there is a separate volume control 
for the Bluetooth headset and for the Android smartphone. Ensure 
that both volume controls are set to max. To increase volume, tap 
and hold the touchpad of the right earbud until you hear the voice 
prompt "Volume max". Now increase the smartphone's volume to 
maximum volume.

For smartphones that feature "absolute volume control" such as the 
Apple iPhone, there is only one volume control available, so you can 
either use the volume control of the smartphone or that of the CX 
True Wireless. With a few smartphones "absolute volume control" is 
not available by default but can be activated within the development 
options.

Summary of Contents for 508973













Reviews: