8/8
If the Tx Green LED does not light up, there may be four reasons:
1) the sensor is not yet paired with the R-GWR gateway;
2) The sensor is positioned beyond the maximum distance to allow communication with the R-GWR gateway;
3) the R-GWR gateway is off.
4) the sensor battery is low.
NB: it is always possible to force sending the data packet from the sensor by pressing the pairing button indicated
in the sensor operation diagram shown on page 6.
TROUBLESHOOTING
CONTACT INFORMATION
Technical support
Product information
This document is the property of SENECA srl. Copies and reproduction are prohibited unless authorised.
The content of this document corresponds to the described products and technologies.
Stated data may be modified or supplemented for technical and/or sales purposes.
